This is a bench mounted machine using compressed air with two
operations. 1) to Clamp, 2) to Crimp. Can be made to suit all
sections. Weight approximately 100kg
Crimper - Aluminium Awning Window
Able to view visible joint before crimping.
4
Ton 12 Station Pneumatic Window or Door Suit Press
This Press is 1200mm x 300mm x 1100mm high on a rectangular
frame, and powered by either pneumatic or hydraulic. The
hydraulic press has its own power pack, right and left hand
cuts, usually done from each side (for cost saving) but can be
made for one sided operation.
Hand Cropping Tool
These tools can also be inserted into other presses to save
effort and increase production.
Shop Front Press
These presses are safe and easy to use. No lubricant other than
to punches. Under piercing is uded and it can be uded on either
folding or hinged doors. Pneumatic operation only. The sections
shown are ALspec and Urich Noyes but can be made to suit your
choice of section.
